Stainless Steel Door Handle Installation Introduction

Stainless Steel Door Handle Installation Introduction

At the beginning, the new door lock piece device of the stainless steel door handle passes through the door on the side of the hole, and the component of the latch bolt curve of the security door is fixed to the outside of the door. The latch is used to quickly stabilize the gaze attached to the stainless steel door handle kit.

Then we went into the door of the door and the outer door handle that protruded from the outside. Generally it is a sleeve with two sleeves and an internal latch hole that would work well. Hold the door handle firmly until the cover is against the door. So we reached into the inner door of the door and pulled the handle from the inside of the door. Two stabilizing screws, the holes in the cover plate, follow the clockwise rotating screw thread to the outer door pull glove, tighten the screw firmly, use a Phillips screwdriver. Finally, the screws on the side of the curved side that are bent around the inside of the door frame are arranged in an orderly manner, and the screws attached to the impact plate and the kit are reliably stabilized.

The above is the installation of the complete stainless steel door handle, the steps are closely linked, do not take the wrong step.

Close Menu
×
×

Cart

 
 
 

click here to send an inquiry or contact.
20% more off!

Notice!